Skip to main content
  • Home
  • Seco-Larm Enforcer Curtain Sensors, 10 Beams, 79"

Seco-Larm Enforcer Curtain Sensors, 10 Beams, 79"

$212.76
SKU: SEE968010B25

IN STOCK! Ships same business day if ordered before 3pm PT

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

This is a heavy and/or oversized item and does not qualify for our shipping promotion.

Product Description

These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.

Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.

No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.

  • Rugged aluminum construction.
  • LED alignment indicator.
  • No synchronizing wires required.
  • NO/NC relay output.
  • Weatherproof IP65 construction.
  • Slimline design
  • Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable).
  • For windows, doorways, etc., where space is limited.
  • L-brackets and mounting hardware included.

Tech Specs

  • Voltage: 12~24VDC
  • Standby Current: 110mA
  • Active Current: 100mA
  • Number of Beams: 10
  • Max. range: 25 feet (8m) outdoor, 50 feet (16m) indoor
  • Output: NO./NC. relay output, 1A at 12~24VDC
  • Operating temperature: -49 to 131 degrees F (-45 to 55 degrees C)
  • Attenuation LED: (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power
  • Size:
    • Length: 79 inches (201 cm)
    • Width x Height: 15/16 x 7/8 inches (33.5 x 22.3mm)
  • Case: A1 alloy
  • Response time: 0.5 ~ 70ms.
  • Hardware: Mounting Bracket Included