Seco-Larm Enforcer Multi-Color LED Strobe Light
Product Description
The Seco-Larm Enforcer Multi-Color LED Strobe Light provides all the functions of a regular strobe light, but with more versatility. The Multi-Color LED Strobe Light can change between seven different colors which can be set manually via DIP switches, or triggered by an external device via 3 trigger input wires. There are 5 vertical LED strips, making the light more visible from various directions, and a variable resistor to adjust flashing speed. The Multi-Color LED Strobe Light has an operating life of 50,000 hours – over 160 times that of a regular strobe light. No more bulbs to replace!
- 7 Colors possible – Red, green, blue, cyan, magenta, yellow, and white
- Operating life of over 50,000 hours (over 5.7 years)
- Simple 2- to 5-wire installation
- Set color via DIP switches, or trigger colors with an external device via 3 trigger input wires
- Utilizes high-intensity LEDs
- 5 Vertical LED strips (25 LEDs total) increase visibility from various directions
- Adjustable strobe speed, 60~260 times/min
- High-impact resistant case
- High-impact and heat-resistant lens
- Reverse polarity protection
- Weather resistant – IP66
In The Box:
- Multi-Color LED Strobe Light
- Manual
Tech Specs
- Part Number: SL-3301-BAQ
- Vertical LED Strips: 5
- Total Number of LEDs: 25
- Possible Colors: Red, Green, Blue, Cyan, Magenta, Yellow, White
- Operating Voltage: 9~24 VAC/VDC
- Current draw @12VDC (max.):
- Strobe: 350mA
- Steady ON: 350mA
- Adjustable strobe speed:
- Maximum setting: 260 times/min
- Minimum setting: 60 times/min
- Operating Life: Over 50,000 hours (over 5.7 years)
- Operating Temperature: -4°~144° F (-20°~65° C)
- Electrical Protection: Reverse polarity protected
- IP Rating: IP66
- Base: High-impact resistant black ABS
- Lens: High-impact heat-resistant acrylic
- Dimensions: 3-15/16 x 3-1/8 inches (100 x 79 mm)