Seco-Larm Enforcer PoE Repeater
Product Description
The ENFORCER NR-P101FQ PoE Repeater extends power and data an additional 394ft (120m) for a maximum range of up to 1,116ft (340m) when using two PoE Repeaters, thus eliminating the need for additional switches, hubs, and expensive fiber optic installations. The NR-P101FQ is compliant with standard PoE IEEE 802.3af. The NR-P101FQ is simple to install with no external power source required, and no setup configuration needed.
- Extends power and data an additional 394 feet (120m).
- Compliant with standard PoE IEEE 802.3af.
- Installs on Cat5e/6 4-pair UTP cable with RJ45 jacks.
- Supports 10/100/1000 BASE-T transmission rates.
- Passive operation – no external power required.
- Easy plug-and-play installation.
- Auto-sensing for detecting PoE or non-PoE devices.
- Built-in LED status indicators.
- Sealed and fanless for increased reliability.
- Compact, wall-mountable for convenience.
In The Box:
- 1 x PoE Repeater
- 4 x Screws
- 4 x Plastic Wall Anchors
- 1 x Manual
Tech Specs
- Part Number: NR-P101FQ
- Connector:
- In: RJ45
- Out: RJ45
- Power Consumption:
- Standby: 1.1W (23mA)
- @10Mbps: 1.44W (30mA)
- @100/1000: Mbps 1.92W (40mA)
- Transmission Range:
- Single repeater: Up to 722 feet (220m)*
- Two repeaters: Up to 1,116 feet (340m)*
- Max. Device Power Range with PoE Switch:
- 1st PoE Repeater: 8.58W@722 feet (220m)
- 2nd PoE Repeater: 4.21W@1,161 feet (340m)
- PoE: IEEE 802.3af Standard, 48V, 12.95W
- Data Link: Pin 1/2, 3/6, 4/5, 7/8
- Power Link: Pin 1/2 (+), 3/6 (-) end-span
- Material: Aluminum
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Dimensions: 2-5/8 x 4-5/16 x 1-1/16 inches (67 x 110 x 27 mm)
- Weight: 6.4 ounces (180g)
- Warranty: 1 Year
*The maximum distances are typical for installations using 24AWG CAT5 cable or better. Actual limits depend on cable quality and POE device characteristics.