Seco-Larm Enforcer Push-to-Exit Wireless Desktop Transmitter
Product Description
The ENFORCER Wireless Desktop Transmitter is the ideal solution for difficult access control installations. The Wireless Desktop Transmitter is perfect for various desktop applications, mounting on cement or brick walls, or any other location where it is difficult to run wires.
- Built-in RF transmitter, 315MHz
- Powered by 9VDC battery (included)
- Range up to 250ft (76m)*
- Over 68 billion (6.8x1010) possible codes
- LED to indicate transmission and low battery
- Placed on a desktop or wall mounted
- ABS Plastic single-gang plate
- Green 2" square button
- English, Spanish, French, and blank message plates included
- Requires a SK-910 (315MHz) series receiver
*Actual operating range will vary greatly depending on the installation and operating environment.
In The Box:
- Wireless Desktop Transmitter
- 9V Alkaline battery
- Back box
- 2 x Wallplate screws
- 2 x Mounting screws
- 2 x Wall anchors
- 4 x Message plates (English, Spanish, French, blank)
- 4 x Adhesive rubber feet
- Manual
NOTE: Requires an SK-910 (315MHz) series receiver.
Tech Specs
- Part Number: SD-862T-GWSQ
- Type: RF Wireless
- Operating Frequency: 315 MHz
- Operating Voltage: 9VDC (Alkaline battery included)
- Battery Life: Up to four (4) years (60 uses per day)
- Maximum Range: 250 feet (76m) - Actual operating range will vary greatly depending on the installation and operating environment.
- Dimensions:
- Desktop: 4-5/8 x 2-7/8 x 1-7/8 inches (117 x 73 x 48 mm)
- Wall-mount: 4-5/8 x 2-7/8 x 2 inches (117 x 73 x 50 mm)
- Weight: 6 ounces (178g)
- Approvals: FCC, CE, RoHS
- Warranty: 1 Year