Skip to main content
  • Home
  • Seco-Larm Enforcer Quad Photobeam Detectors

Seco-Larm Enforcer Quad Photobeam Detectors

$300.65 to $353.73
SKU: SEE964QxxxQ

Please Select Option To View Availability

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The Enforcer E-964-Q Series Quad-Photobeam Sensors are ideal for long-distance protection. Four selectable beam frequencies allow for superior perimeter protection by eliminating crosstalk and interference between multiple units. False alarms created by animals and falling leaves are minimized by the sensor's detection method of all 4 beams simultaneously broken.

The E-964-Q Series of sensors is designed to work in even the most extreme conditions. A built-in heater automatically turns on and off depending on the outside temperature. An environmental control output senses a slow degradation in beam strength when weather conditions worsen preventing false alarms.

Installation and alignment is quick and easy with the Enforcer E-964-Q Series. The built-in laser and visual alignment systems quickly and easily pinpoint the approximate mounting location for the transmitter and aid in aligning the transmitter and receiver units once mounted. A beam strength indicator clearly displays the strength of the beam at the receiver with five LEDs.

  • Four selectable beam frequencies to eliminate interference between multiple units for enhanced perimeter protection.
  • Audible beam alignment (buzzer).
  • Beam strength indicator (5 LEDs).
  • Environmental Output (Selectable N.O. or N.C.): Signal is sent if degradation in environmental conditions is detected such as thickening fog to prevent false alarms.
  • Built-in heater.
  • IP-55 ingress protection.
  • Lensed optics reinforce beam strength and provide excellent immunity to false alarms due to rain, snow, mist etc.
  • Automatic input power filtering with special noise rejection circuitry.
  • Voltage testing points for fine tuning the beam alignment.
  • Delay time adjustable for nearly all situations.

Tech Specs

  • Max. range (outdoor):
    • 165Q: Up to 165ft (50m)
    • 330Q: Up to 330ft (100m)
    • 495Q: Up to 495ft (150m)
    • 660Q: Up to 660ft (200m)
  • Max. range (indoor):
    • 165Q: Up to 330ft (100m)
    • 330Q: Up to 660ft (200m)
    • 495Q: Up to 990ft (300m)
    • 660Q: Up to 1,320ft (400m)
  • Current (Tx, Rx):
    • 165Q: 100mA
    • 330Q: 115mA
    • 495Q: 120mA
    • 660Q: 125mA
  • Current (Tx, Rx, heaters):
    • 165Q: 260mA
    • 330Q: 270mA
    • 495Q: 280mA
    • 660Q: 290mA
  • Input voltage: 12 to 24 VAC/VDC (non-polarity)
  • Delay time: 50 milliseconds to 700 milliseconds (variable)
  • Detection method: All 4 beams simultaneously broken
  • Selectable beam frequencies: Four (4) channels
  • Alarm output: Form "C" relay COM/N.O./N.C. 1A at 125VAC/24VDC
  • Tamper output (Tx & Rx): NC switch, 1A at 120VAC
  • Environmental output: Selectable N.O. or N.C. 1A at 125VAC/24VDC
  • Beam-strength indicator: 5 LEDs indicate signal strength from high to low
  • Signal LED (Rx): Red LED ON – beam is broken or Tx and Rx out of alignment
  • Power LED (Tx & Rx): Green LED – illuminated when power is on
  • Laser wavelength: 650nm
  • Laser output power: ≤5mW
  • Alignment angle
    • Horizontal: ±900
    • Vertical: ±150
  • Operating temperature: -13 to 131 degrees F (-250 to 55 degrees C)
  • Weight: 5.7 pounds (2.6kg)
  • Ingress protection: IP55
  • Case: PC Resin
  • Dimensions: 15-1/4 x 4-7/16 x 4-11/32 inches (387 x 113 x 110mm)