Skip to main content
  • Home
  • Seco-Larm Power Supply/Charger with Enclosure

Seco-Larm Power Supply/Charger with Enclosure

$53.43
SKU: SEST24063AEQ

Order now and we'll ship usually within 3-5 business days.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The Seco-Larm Power Supply/Charger ST-2406-3AEQ ensures that your alarm system and access control system have enough power to function in case of a power outage. Protected by fused battery outputs, input polarity protection diodes, and backup battery polarity reverse protection, this device can be used to maximize the security and efficiency of just about any installation of an alarm or access control installation. It includes an enclosure with enough space for up to 2 backup batteries (leads included for one optional backup battery).

  • Automatic recharging of backup batteries
  • Automatic switchover to backup battery if main power is lost or cut
  • Built-in battery short-circuit protection
  • Low-battery cutoff
  • LEDs indicate power status
  • Programmable DC voltage output
  • Regulated and filtered output voltage
  • Fused output for a regulated charge
  • Heavy-duty steel case to protect power connections
  • Enclosure has space for up to two 4Ah or one 7Ah backup batteries
  • Includes battery leads for easy installation
  • High efficiency at full load
  • Heat sink free design

In The Box:

  • Power Supply/Charger Unit
  • Enclosure
  • (3) Wire Leads for Backup Battery
  • Flange Nut for Wire Relief Clamp
  • Wire Relief Clamp
  • (2) Screw-On Wire Nuts
  • Large Grommet
  • Small Grommet
  • Manual

NOTE: Batteries not included.

Tech Specs

  • Part Number: ST-2406-3AEQ
  • DC Voltage: 6, 12, 24
  • Operating Voltage:
    • 12~24 VAC/VDC for 6VDC
    • 18~24 VAC/VDC for 12VDC
    • 24~28 VAC or 26~28 VDC for 24VDC
  • Current (continuous): 2.5A
  • Current (peak): 3.0A
  • Current Output (max. charge):
    • 6V=100mA
    • 12V=220mA
    • 24V=450mA
  • Master Fuse: 5A
  • Lower Battery Cut Off: When battery voltage is <20%
  • Operating Temperature: -4° to 149° F (-20° to 65° C)
  • Relative Humidity: 5% to 95%, non condensing
  • Dimensions:
    • Board: 2-7/8 x 2-7/8 x 1-3/8 inches (73 x 73 x 35 mm)
    • Enclosure: 10 x 7-3/4 x 3-1/2 inches (254 x 196 x 89 mm)
  • Certifications: CE, RoHS
  • Warranty: 1 Year

Product Docs