Speco 2MP Intenisifer Board IP Camera, 2.9mm Fixed Lens and 3.6mm Pinhole Lens Included
The Speco Technologies O2iBD3 Intensifier 2MP Network Board Camera is a reliable addition to your Speco surveillance network. This wall mounted camera captures AV footage in 1080p resolution at 30 fps. The camera comes with two lenses to best fit into your network: It has a 2.9mm fixed lens with a 117° horizontal field of view and 3.6mm pinhole lens with an 85° horizontal field of view. Room for additional memory is available through its onboard microSD memory card slot, (microSD cards sold separately). This board camera complies with ONVIF profile S, making it compatible with a wide range of surveillance devices. PoE connections simplify connectivity through a single ethernet cable.
- 2.9mm fixed lens and 3.6mm pinhole lens included
- See color in low light without IR LEDs
- Miniature board design is perfect for tight spaces
- Supports up to 1080p @ 30fps
- Built-in standard PoE (IEEE 802.3af)
- No problems caused by objects that reflect or absorb IR light sources
- 2-way audio communication
- Sensor input and relay output
- Micro SD card slot (card not included)
- Conformant with ONVIF Profile S
- 5 year warranty
In The Box:
- Network Board Camera
- 2.9mm Fixed Lens
- 3.6mm Pinhole Lens
NOTE: Network video recorders (NVR) sold separately.
- Part Number: O2IBD3
Camera Specifications
- Image Sensor: Progressive scan 1/2.8" CMOS, 2MP
- Maximum Resolution: 1920 x 1080
- Minimum Illumination Color: F1.4, 0 lux (max. Intensify)
- Field of View: 117° (2.8mm) – 85° (3.6mm) degrees
- White Balance: ATW / AWB
- Compensation: WDR
- Electronic Shutter Speed: 1/25 ~ 1/100000 sec
- DNR: 2D/3D
Video Specifications
- Main Resolution: 1080P (1920x1080 ) / 720P (1280x720) @ 30fps
- Video Compression: H.264 (HP/MP/BP), MJPEG
- Bitrate Control: VBR, CBR
- Multiple Streaming: 3 simultaneous streams
Audio Specifications
- Mono Input/Output: G.711
Network Specifications
- Protocols: IPv4, TCP, UDP, RTP, RTSP, HTTP, SMTP, FTP, DHCP, UPnP, DNS
- DDNS Support: Speco DDNS (free of charge)
- Security: User ID & Password protection, IP/MAC address filtering, digest authentication
- User Access: Max. 8 simultaneous users. *Actual number of users may vary depending on bandwidth
Client Specifications
- Web Browser Support: Windows (Internet Explorer 8 and up)
- PC Application: SecureGuard VMS
- Mobile: SecureGuard Client (iPhone and Android™)
External Terminal Specifications
- Ethernet: 10/100 Mbps
- Alarm: 1 sensor input, 1 relay output (terminal block)
- Audio: 1 mic in, 1 line out (terminal block)
- Power: Terminal block
System Specifications
- PoE: Standard (IEEE 802.3af)
- Analytics: Motion detection, tampering, sensor input
- Alarm Triggers: Analytics
- Alarm Events: FTP upload, email upload, micro SD card recording, relay output
- Image Settings: Privacy mask
Operating & Unit Specifications
- Power: PoE, 12VDC (power supply not included)
- Power Consumption: 12W (max)
- Operating Temperature: -22 to 104 degrees F (-30 to 40 degrees C)
- Unit Dimensions: 3.9" (Dia.) x 11" (H)
- Unit Weight: 2.3 lbs.
- Warranty: 5 Year