• Home
  • X10 Duplex Wall Receptacle (Both Outlets Controlled)

X10 Duplex Wall Receptacle (Both Outlets Controlled)


Please Select Option To View Availability

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The XPR, 20A Duplex Receptacle is used as a Remote Load Switching Module, which responds to X10 ON/OFF Commands from an X10 Controller. Loads may be plugged into either one of the top/bottom receptacles or hard-wired from the Blue Switched Leg Wire to external loads or down-line receptacles.

Note: The XPR Module can "Sense" if any load is plugged into it. When the load on/off switch is toggled to the On position, the Module responds by turning ON the load connected to it. Total load(s) must not exceed 20A.

Tech Specs

  • Number of Controlled Outlets: 2
  • Minimum Load: 40W
  • Maximum Current: 20 Amps
  • Operating Voltage: 110-120 VAC
  • Dimensions: 2-3/4(H) x 1-3/4(W) x 1-1/2(D) inches (4-1/8 inch height including mounting tabs)
  • Warranty: 2 Years Limited