X10 RR501 Wireless Base Transceiver Module (Open Box)
The RF Base Transceiver works with X10's line of RF Remote Controls and PIR Wireless Motion Sensors. The newly redesigned RF Base Transceiver Module works as an X10 Signal Converter as it receives all 16 Unit Code Addresses (1-16), on one House Code (A-P), via wireless RF Remotes. Wireless X10 Remotes need this Base Transceiver Module to catch the radio signals and convert them to X10 Signals on the electrical power lines. If the Transceiver Module detects X10 activity on the line, it holds off transmitting the Command until the line is clear.
Add as many Handheld Remotes and X10 Wireless Modules, as you want within one House Code (A-P) to each Base Transceiver. Be careful to have only one RF Base Transceiver Module or X10 Security Console (which also converts RF Signals into X10 Signals for the electrical power line) per House Code. If more than one Base Transceiver Module is used on the same House Code, X10 Signal Collisions may result.
- Part Number: RR501
- Power Requirements: 120 VAC, 60 Hz
- Load Rating:
- Resistive: 15 Amps
- Incandescent: 500W
- TV: 400W
- Motor: 1/3 HP
- Dimmable: No
- Dimensions: 4.25(H) x 2.75(W) x 1.25(D) inches
- Warranty: 120 Days