Seco-Larm Surface-Mount Electric Rim Strike, 3/4 Inch

The SECO-LARM Surface-Mount Electric Rim Strike is designed for rim-type exit devices with a 3/4" Pullman latch bolt, such as push bar releases. The Electric Rim Strike features selectable fail-safe/fail-secure operation for guaranteed protection and operation in emergency situations. The strike surface mounts onto metal or wood frames, eliminating the need for cutting into the frame during installation.

Features:

• Electric rim door strike accommodates up to 3/4" Pullman latch
• Surface-mounts on metal or wood frames
• Reversible non-handed stainless steel design with horizontal adjustment
• Field-selectable for fail-safe or fail-secure operation
• Works with standard rim-type exit devices including SECO-LARM SD-962AR-36A and SD-962AR-36G
• Static strength – 1,500-lb (6673N)
• Tested for 250,000 cycles (UL Tested)
• UL 294 and 1034 Listed
• Tamper-resistant
• Non-polarized connection
• 12/24 VDC Operating voltage
• Low current draw: 540mA@12VDC, 270mA@ 24VDC
• Spacers included: 3x 1/32" (0.9mm)
• For Indoor Use Only

In The Box:

• Strike
• Blind nut kit
• Dead latch ramp adapter
• Hex wrench
• 12VDC cable connector
• 24VDC cable connector
• 2x Blind nuts
• 2x Crimp connectors
• 2x Hex socket head cap screws
• 2x Philips flat head screws
• Spacers – 3x 1/32" (0.9mm)
• Manual

NOTE: The SD-998C series is intended to be used with UL Listed Exit Hardware. The SD-998C series shall not impair the intended operation of an emergency unit. The SD-998C series shall not impair the operation of panic hardware mounted on the door.