X10 Duplex Wall Receptacle (Both Outlets Controlled)

The XPR, 20A Duplex Receptacle is used as a Remote Load Switching Module, which responds to X10 ON/OFF Commands from an X10 Controller. Loads may be plugged into either one of the top/bottom receptacles or hard-wired from the Blue Switched Leg Wire to external loads or down-line receptacles.

Note: The XPR Module can "Sense" if any load is plugged into it. When the load on/off switch is toggled to the On position, the Module responds by turning ON the load connected to it. Total load(s) must not exceed 20A.