Bellman & Symfon Visit Vibrating Pager Receiver
Product Description
The BE1230 Bellman Visit Pager is a receiver within the Bellman Visit System for indoor use that attracts the attention of the user via LEDs and by vibrating. It is activated via radio signals from any transmitter within the Bellman Visit System. Pressing the test button will turn on the 30 second snooze function unless the unit is activated by the Bellman Visit Fire Alarm. In this event, the unit will continue to vibrate as long as the Smoke alarm transmitter is activated.
Available for sale only in the U.S.
Tech Specs
Power Supply
- Battery: 1.5 V AAA Alkaline or 1.2 V AAA NiMh.
- Operating time:
- Alkaline: Approximately 30 days
- NiMh: Approximately 10 days once fully charged
- Power consumption:
- Active: Approximately 240 mA
- Idle position: Approximately 1 mA
- Charging: NiMh batteries can be charged using the BE1260 Bellman Visit Charger (sold separately). Charging time is then up to 8 hours.
Radio Function
- Radio frequency: 433.92 MHz
- Number of channels: 64 logical channels
- Coverage: The normal coverage between a transmitter and receiver in the Bellman Visit System is approximately 100 feet (80 m) with a clear line of sight. Coverage is reduced if walls and large objects screen off the signal. Any thick walls constructed of reinforced concrete will greatly affect coverage.
Additional Information
- Activation: Via radio, Bellman Visit System
- Output Signals: Built-in vibrator, LEDs
- Dimensions: 57(W) x 86(H) x 29(D) mm
- Weight:
- With battery: 70 grams
- Without battery: 55 grams
- Color: Grey with red test button
- For indoor use only