ELK Serial to Ethernet Converter

The ELK-IP232 is an Ethernet to RS-232 Serial Port Bridge. It may be used to connect any standard serial communications device such as a PC, an audio/video distribution system, or an Elk-M1 Control, to an Ethernet network. It allows bi-directional communication between the two. It operates as a network server, which means it does not initiate network connections, but rather, accepts them. Once a network connection is accepted, the remote networked device or computer is virtually connected to the serial device on the other side of the Bridge. Both the network device and the serial device can send and receive messages to and from each other. Up to twelve network devices may be connected simultaneously. Data sent from any one of them is bridged to the serial port. Data received on the serial side is transmitted to all connected network devices.

Features:

• Allows up to twelve (12) simultaneous TCP-IP network connections
• Selectable baud rate from 300 to 115200 baud
• Supports software handshaking (XON/XOFF) and hardware handshaking (RTS/CTS)
• Multiple Bridges can be used on the same network
• Can be updated in the field with new firmware using the Configuration Utility
• Integrated 802.3 compliant 10/100 Mbit network interface
• RS232, DB9M 9-pin serial port connection
• DB9F to DB9M serial ribbon cable included
• Connects to the M1 RS-232 Serial port (Port 0).
• RJ45 8-pin Network Jack
• 2.1mm barrel type power connector (center positive)
• LED Indicators for Power, Link, and Data

In The Box:

• ELK-IP232 Serial to Ethernet Converter
• 1.6Amp 12Vdc Power Supply 
• DB9 Elk Serial Ribbon Cable (W040A)
• Instructions