Enbrighten Z-Wave Plus In-Wall Smart Toggle Switch With QuickFit And SimpleWire, Gen5

Replace standard light switches with smart home switches like the Enbrighten Z-Wave Plus In-Wall Smart Toggle Switch With QuickFit™ And SimpleWire™, Light Almond. Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create automated schedules via Z-Wave. Add Z-Wave Plus remote control and smart home automation to a wired lighting, motor, or resistive load. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups, up to 4, when paired with Enbrighten Z-Wave Add-on Switches. The Z-Wave Switch is compatible with automation hubs from Ring, Wink, SmartThings, HomeSeer, Vera, Nexia and more.

Features:

• Works with all LED, CFL, and incandescent bulbs up to 960W, along with 1800W(15A) resistive and 1/2 HP motor loads
• Voice command compatible with Amazon Alexa and Google Home
• LED status light helps locate the switch in the dark
• Built-in Z-Wave repeater extends the wireless range of your Z-Wave network up to 150ft
• 20 percent smaller and more efficient design than previous models, making them ideal for multi-gang configurations or other wiring applications with limited space
• Auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly

NOTES: For indoor use only. Requires a Z-Wave network controller. Wallplate not included. Uses standard single-gang wallplate. The fixture controlled by the switch must not exceed 960 watts (Incandescent); 1800W (15A) Resistive or 1/2 HP Motor. The switch is designed only for use with permanently installed fixtures. Alexa/Echo/Google Assistant devices sold separately. NOT directly compatible with ECHO PLUS. Will work through Z-Wave certified hub only.