FIBARO Z-Wave Plus Wall Plug with USB
The FIBARO Z-Wave Wall Plug with USB adds Z-Wave support to plugged in and USB devices and turns them into smart devices. The Wall Plug comes with the following features that make it steps above standard outlets:
- Supports lights and appliances up to 1800W
- Built-in USB charging and surge protection for plugged devices
- A multi-color LED frame that changes colors to indicate power usage
- On/Off remote Z-Wave control and scheduling
- Energy measurement and reporting features
Color coded power usage
The LED ring frame changes color according to the amount of power used by the plugged device: 70W Blue, 145W Green, 350W Yellow, 750W Orange, 1350W Red, 1800W Purple. The LED ring also changes color when accessing the Wall Plug's menu and when adding/removing devices to and from a Z-Wave network.
The FIBARO Wall Plug comes equipped with a built-in USB charger. Connect a phone or tablet along with a lamp or desk fan into one plug, saving outlet space and energy thanks to the Wall Plug's energy measuring and surge protection features.
Using a Z-Wave mobile application, you can view the status and energy usage of connected devices, switch the devices on or off, or schedule the plug to turn on or off at set times or when you know you won't be using it.
The FIBARO Wall Plug also comes with an additional power measurement feature to identify which devices use the most energy and record a history of power consumption in particular rooms or during scheduled periods.*
Immediate notifications ... of the unusual situation
The Wall Plug has built-in surge protection and can send notifications of any electrical irregularities straight to your smartphone. With these functions you will always be immediately informed about any interruptions or discrepancies in your devices' performance.
Just in time
By setting a particular time of operation you can make sure your bread is perfectly toasted or that the dishwasher starts early enough to provide you with clean dishes for dinner.
In The Box:
- Wall Plug with USB
NOTE: Requires a Z-Wave hub or gateway. USB port enables charging and monitoring only – does not enable Z-Wave remote control. *Energy panel available only in FIBARO system based on Z-Wave.
- Part Number: FGWPB-121-ZW5
- Frequency: 908.42 MHz (U.S.)
- Power: 120V AC, 50/60 Hz
- Max Load: Resistive loads: 15A, Incandescents: 8A, Inductive: 15A, Motor: 373
- USB Port:
- Voltage: 5V
- Current: 1 Amp max
- Operating Temperature: 32 - 104 degrees Fahrenheit (0-32 degrees Celsius)
- Dimensions: 2.32 x 2.32 x 2.01 inches
- Range: Up to 130 ft
- Approvals: UL Listed
- Warranty: 1 Year