GoControl Z-Wave Plug-in Appliance Module
Product Description
The PS15EMZ5-1 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times). The Plug-In Appliance Module can monitor energy usage of plugged-in devices. This plug-in Appliance Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
In The Box:
- Z-Wave EM Appliance Module
Tech Specs
- Part Number: S15EMZ5-1
- Signal (Frequency): 908.42 MHz
- Maximum Load:
- Resistive: 15 amps (1800 watts) maximum, 120 VAC
- Motor: 1/2 H.P. maximum, 120 VAC
- Incandescent: 600W maximum, 120 VAC
- Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
- One Z-Wave controlled and one pass through outlet
- Security beaming
- Network wide inclusion