PCS SimpleWorx Fixture Module Relay, 20A
Product Description
The FMR module was designed to be flexible enough to control almost any lighting or motor load, which may not have a direct connection to an existing switch or a switch without a neutral wire. The FMR switches line voltage in response to the on or off signals coming from its linked transmitter.
Simply mount the FMR on any standard electrical box by snapping it into a 1/2" knockout. The module can either mount outside of the box or reside in the box. Use standard wire-nuts to connect the FMR to line and neutral and the loads. The high 20A rating of the Fixture Module Receiver can control any incandescent lighting circuit, fluorescent fixtures, pumps, fans, motors, motorized damper controls or landscape transformers up to a conventional 20A circuit.
- Easy 3 wire installation
- 14AWG wires for 20A On/Off control
- Easy snap in installation through ½" knockouts
- Plenum rated
Tech Specs
- Part Number: SFMR-AC
- Color: White
- Warranty: 5 Year
Electrical
- Power Requirements: 120 Volts AC, 50/60Hz
- Channels: 1
- Switch Load Types: Incansdescent,Fluorescent, Ballast, Induction, LED, Motor
- Relay Lifetime: 100,000 on/off operations at full electronic ballast load
- Power Wire: Three 14 AWG gauge, 105 C insulation
- Black: Hot/Line
- White: Neutral
- Red: Load
- Max Load: 20Amps at 120V AC 50/60 Hz
- Standby Power Consumption:<0.8 Watts
- Environmental Conditions: Indoor Use Only
- Temperature: -40 to 194 degrees F (-40 to 90 degrees C)
- Humidity: 10 to 90 percent RH (non-condensing)
- Certifications: Safety tested for USA and Canada to ETL tested to UL508 UL-508-2010 CSA C22.2 #14-2010
Operation
- On-Levels: 0/100%
- During Power outage: Retains all settings in Non-volatile EERPOM
Mechanical
- Set Button: Button
- Wire Nuts: 4 included
- Mounting:
- Single Gang or multiple-ganged junction box
- 1/2 " Knock out Standard J Box
- Surface or recessed mount module, mounts in fixture ballast compartment
- Dimensions: 2.8(L) x 1.6(W) x 2.25(D) inches
- Weight: 4 ounces
- US Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.