Russound Digital Amplifier, 16-Channel

$2,089.00

Quantity	Price

SKU: RUD1650

Order now and we'll ship usually within 3-5 business days.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

This is a heavy and/or oversized item and does not qualify for our shipping promotion.

Product Description

The Russound D1650 Sixteen-Channel Digital Amplifier offers similar features as the Russound R-Series amplifiers but in a smaller chassis. It's compatible with Russound volume controls and features 16 channels for 8 independent zones with the capability to to be used in bridge mode for more flexible power configurations. It offers ultra-low distortion output, which allows undistorted, clean audio even when listening to high volumes; and with advanced triggering options, the amplifier can operate on demand. There is also no amplifier hum from your speakers when the system is not in use with a robust protection circuit in its design, the D1650 will operate safely with efficiency under extreme conditions.

Designed with 16-channels for 8 independent zones with bridge mode capability
High efficiency digital amplification runs cool
Global bus input, independent inputs per zone, and global trigger input/output
Independent trigger input/output per zone
Audio sensing with auto-switching delay settings per zone
Class-D power compatible with Russound volume controls

Why You Would Use This Product:

The D1650 Sixteen-Channel Digital Amplifier offers versatility because of its bridge mode capability, allowing you to use it for a rigorous home theater application or for a simple application using surround speakers. For example you could run a 7.1.2 system at 7 channels at 160 watts (bridge mode) for high-powered audio and 2 channels at 50 watts.

In The Box:

D1650 Digital Amplifier, 16-Channel
Mounting Hardware
Manual

Tech Specs

Part Number: D1650
UPC: 612934536229
Power Output: 80W /Channel, 1kHz into 4 Ohms, 50W /Channel, 1kHz into 8 Ohms. Bridged: 160W, 1kHz into 8 Ohms
Amplified Channels: 16 channels, 8 independent zones
Signal-to-Noise Ratio: >90dB A-weighted
Frequency Response: 20Hz to 20kHz +1.7/-1dB at 1W output into 8 Ohms
Minimum Impedance: Stereo Mode 4 Ohms, Bridge Mode 8 Ohms
Input Sensitivity: 600 mV for 80W @ 1 KHz 4 Ohm One Zone, 700 mV for 50W @ 1 KHz 8 Ohm One Zone
Input Impedance: >22k Ohms Line Input
Trigger Inputs/Outputs: Bus In /Out. Each Zone In/Out 12VDC 100mA
Zone Line Input: Line or Bus select switch per zone
Bridge Mode: Select Stereo or Bridge mode per zone 8 Ohm only
Speaker Connectors: Detachable speaker terminals support up to 14awg wire
Switching Delay: Three settings, 5 seconds, 5 minutes, 10 minutes
Power Requirements:

North American Model D1650: 100-120VAC 60Hz 1200W max, IEC C14 type connector with 3 terminal detachable power cord
International Model D1650i: 220-240VAC 50Hz 1200W max, IEC C14 type connector with 3 terminal detachable power cords for UK, Europe, and Australia