Seco-Lam Enforcer Automatic Voice Dialer, 6 Phone Numbers & 3 Trigger Inputs
Product Description
When triggered by an alarm system, the ENFORCER Voice Dialer can dial up to 6 numbers (up to 3 times for each number) and deliver an 18-second user-recorded message, repeating up to two times. The last 6 seconds of the message can be customized depending on which of the three inputs has triggered the alarm. Each number can contain up to 14 digits, including the number, tones, and pauses. The receiver can then listen in, stop further dialing of alarm numbers, or trigger an auxiliary relay output connected to an external device such as a door lock, siren, strobe light, etc. The user is able to listen in by remote call in as well as a trigger or turn off the auxiliary relay.
- Trigger-activated dialer with user-recorded 18-second alarm message
- The last 6 seconds of the alarm message is individually customizable for each input
- 3 Trigger inputs and 1 inhibit input, each programmable high (input >3.5V) or low (input <1V)
- 1 Auxiliary relay output, NO/NC programmable for 1~255 seconds
- Works as a stand-alone unit or connected to a security system
- LCD display indicates status, either "ready" or "alarm" showing which input and number dialed
- Listen in, stop the dialing process, and/or turn the auxiliary output on or off during dialer call out
- Call in at any time to listen in to the room and/or turn the auxiliary output on or off
- 6 Programmable alarm telephone numbers (up to 14 digits each)
- Programmable auto-dialing to call each number three times or call a single number
- Built-in flash memory to protect against system data loss in case of power failure
- Tone or pulse dialing
- Terminal blocks for all external connections
- Wall-mountable
In The Box:
- Voice Dialer Unit
- (2) Wall Mount Screws
- (2) Plastic Wall Anchors
- Manual
NOTES: For single-line analog or VOIP telephone systems. The E-922CPQ may work with some digital phone systems (single-line or PBX), depending on the system. If the "Inhibit" input is not used, it should be programmed as low N.C.
Tech Specs
- Part Number: E-922CPQ
- UPC: 676544021490
- Operating Voltage: 10~18 VDC
- Current Draw (max.):
- Standby: 50mA@12VDC
- Dialing: 200mA@12VDC
- Phone System: For single-line analog or VOIP phone systems
- Alarm Message Length (user recorded): 12s site message + 6s individual message for each input
- Programmable Alarm Phone Numbers: 6
- Maximum Digits Per Phone Number: 14
- Programmable Dial Attempts: Up to 3 times per number
- Alarm Message Repeat: 1~2 times for each number
- Trigger Inputs:
- 1-3: Programmable high (input >3.5V, max. 15V) N.O. or N.C. or low (input <1V) N.O. or N.C.
- Inhibit: Programmable high (input >3.5V, max. 15V) N.O. or N.C. or low (input <1V) N.O. or N.C.
- Auxiliary Output: 2A@24VDC, NO/NC, programmable 1~255s
- Other Features:
- Works as a stand-alone unit or connected to a security system
- Listen in, stop the dialing process, and/or turn the auxiliary output on or off during dialer call out
- Call in at any time to listen in to the room and/or turn the auxiliary output on or off
- Tone or pulse dialing
- Terminal blocks for all external connections
- Wall-mountable
- Operating Temperature: 32°~140°F (0°~60°C)
- Weight: 15.9-oz (450g)
- Dimensions: 4-1/16 x 5-9/16 x 1-11/16 inches (104 x 142 x 43 mm)
- Credentials: FCC, CE RoHS