Seco-Larm Enforcer Access Control Keypad, Outdoor, Surface Mount

• 1,100 Users over 2 Outputs. Codes may be 4~8 digits: – Output #1 – Form C relay, 1A@30VDC, 1,000 users – Output #2 – Form C relay, 1A@30VDC, 100 users
• Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours).
• Super user code gives admin access to keypad.
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours).
• Programmable egress input with optional warning alarm and delayed egress.
• Real-time clock to auto-disable access at specific times.
• Up to 50 (01~50) duress codes for output #1 and 10 (01~10) for output #2.
• Duress code signals a silent alarm if an authorized user is forced to open the door under duress.
• 12~24 VDC/VAC Auto-adjusting operation.
• All features are programmed directly from the keypad: No need for an external programmer.
• IP66 Weatherproof Rating.
• Mounts to a standard single-gang back box (surface-mount back box included).
• Durable and attractive stainless steel faceplate.
• Tamper output: N.C. Dry contact, 50mA@24VDC max.
• Keypad illuminates when a button is pressed; backlight can be programmed for
• FULL, AUTO, or OFF in standby mode.
• Mantrap: for a protected area with two doors, this feature allows only one door
• to be open at a time.
• Door sensor input for anti-tailgating operation.
• Door-propped-open warning.
• Door-forced-open warning.
• EEPROM Memory protects programmed information in case of power loss.

In The Box:

• Keypad
• Back Box
• (2) Installation Screws
• (3) Mounting Screws
• (3) Mounting Screw Anchors
• Security Wrench
• Diode
• Manual