Seco-Larm Enforcer Access Control Keypad with Proximity Reader, Backlit

• Built-in proximity reader. 125hHz (EM125)
• 4 Available programmable access modes for all 3 outputs: card only, code only, card and common user code, card and unique user code.
• 1,200 Users over 3 Outputs. Codes may be 4~8 digits:
• Output #1 – Form C relay, 1A at 30VDC, 1,000 users
• Output #2 – Form C relay, 1A at 30VDC, 100 users
• Output #3 – Transistor ground, 100mA at 24VDC, 100 users
• Super user code gives admin access to keypad.
• Durable and attractive stainless steel faceplate.
• Programmable lock out or duress output after 5~10 unsuccessful attempts to key in a code.
• Relay output inhibit control.
• Programmable egress input with optional warning alarm and delayed egress.
• Built-in tamper (N.C.) circuit.
• EEPROM memory prevents data loss.
• Power: 12~24 VAC / VDC.
• Illuminated keypad with programmable status LEDs.
• Door-propped-open warning.
• Alarm output triggers an optional alarm control panel if a protected door is forced open.
• Optional door open alarm.
• Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time.
• Duress output signals a silent alarm if an authorized user is forced to open the door under duress.
• Keypad active output activates for 10 seconds when any key on the keypad is pressed.
• Visitor codes can be programmed for one time use or for a specific amount of time.
• Real-time clock to auto-disable access at specific times.

In The Box:

• Keypad
• Back box
• 2 x Installation screws
• 2 x Mounting screws
• Diode
• Manual

NOTE: Does not include proximity cards or tags.