Seco-Larm Enforcer Electric Deadbolt, Fail-Secure, 12/24 VDC

Adds concealed deadbolt security to most wood or hollow metal doors, with the convenience of electrical operation.

• Incorporates manual lock/unlock cylinder to operate the SD-997A-GBQ if power is lost (turn lock knob from inside protected premises and/or use key from outside protected premises)
• Stainless steel bolt, 5/8" diameter, 5/8" throw
• Fail-secure operation (locks if power is lost)
• Magnetic switch senses door position for positive locking
• Includes control wire which allows for releasing without cutting unit's power
• Attempts to relock multiple times if the door is not closed properly to prevent the solenoid from burning out. Once the door is closed properly it will automatically lock
• Over-current protection 1.5A.
• Door open/close monitor (NO/C/NC)
• Adjustable door lock delay timer (0,3,5, or 9 seconds)
• Use with an optional digital keypad for high security without a key. Easily connects to SECO-LARM Digital Keypads
• Suitable for office-type applications
• Shallow design for use with most metal door jambs
• Multi-directional horizontal or vertical mounting
• Powered by a solenoid
• Stainless steel for strength and long life
• Plug: Special conic cavity stainless steel (thickness 1.5mm~1.8mm)

Note: SECO-LARM also provides an electric deadbolt for Fail Safe operations, the SD-997B-GBQ.

In The Box:

• Lock body
• Manual lock/unlock cylinder
• 2 x Oval cylinder plates
• 3 x Keys
• Strike plate
• Faceplate
• 3-pin connector
• 6-pin connector
• 2 x Large mounting tabs
• 2 x Small mounting tabs
• Mounting screws
• 4 x Templates

NOTE: The SD-997A-GBQ is designed for hollow metal door frames. It is not recommended for wooden door frames. However, the door can be wood or metal.