Seco-Larm Enforcer Electric Deadbolt, Fail-Safe, 12/24 VDC

Seco-Larm Electric Deadbolts are designed for hollow metal door frames. They are not recommended for wooden door frames. However, door can be wood or metal.

• Adds concealed deadbolt security to most wood or hollow metal doors,* with the added convenience of electrical operation.
• Fail-safe operation (unlocks if power is lost).
• Status sensor (Door open/close monitor): SPDT, 500mA at 12VDC(NO/NC/COM).
• Adjustable door lock delay timer (0, 2.5, 5, or 9 sec).
• Control wire allows release without cutting unit's power.
• Magnetic switch determines door position for positive locking.
• Solenoid attempts to lock several times and then shuts off if door not closed properly to prevent burning out.
• Use with an optional digital keypad for high security without a key.
• Easily connects to Seco-Larm's Electronic Keypads.
• Suitable for office-type applications.
• Shallow design for use with most metal door jambs.
• No limiting installation orientation.
• Powered by a solenoid.
• Stainless steel for strength and long life. Operating lifetime: 1,000,000 operations.

In The Box:

• 1 x Lock body
• 1 x Strike plate
• 1 x Faceplate
• 1 x 6-Pin connector
• 2 x Large mounting tabs
• 2 x Small mounting tabs
• Mounting screws
• 4 x Templates