X10 PRO Wired-In Coupler Repeater Amplifier

The X10 Phase Coupler/Repeater serves as a signal-bridge across Split-Phase and 3-Phase Power Systems. The XPCR accepts X10 Controller Commands from one phase (L1), regenerates the X10 Command to full signal strength and repeats it to the other phase (L2) and/or phases (L3). The XPCR performs this function in any directions, i.e. – (L1 to L2/L3 or L2 to L1/L3, or L3 to L1/L2). The XPCR's Red LED indicator illuminates when an X10 Command is sent by an X10 Controller and repeated by the XPCR. The XPCR is NOT a filter.

NOTE: Installation must be performed by qualified installers only. The main breaker must be turned-off during installation. The coupler must be installed in a suitable workbox or enclosure per local code. Installation must be in accordance with all applicable codes and requirements, including, but not limited to, the National Electrical Code (NEC).