Enbrighten In-Wall Add-On Toggle Switch

The Enbrighten In-Wall Add-On Paddle Switch is an add-on toggle switch that pairs with a Enbrighten or Jasco smart switch or dimmer to add another location to control indoor lights or small appliances, creating a multi-way switch configuration. If the master switch is Z-Wave, Zigbee or Bluetooth compatible, the Add-On Toggle Switch can function the same as the master switch but does not act as a signal repeater. The Add-On Toggle Switch cannot function as a standalone switch and must be included into or create a multi-way wiring configuration. With its simple installation process and seamless integration with Enbrighten smart switches, the Add-On Toggle Switch offers convenience and flexibility in managing your home lighting.

• Add-On toggle switch provides additional local On/Off control of a wired load when paired with a primary Enbrighten switch
• Supports 2, 3, 4, 5, or 6-way wiring configurations with Enbrighten Z-Wave Plus, Zigbee, and Wi-Fi in-wall devices when paired with a similarly compatible primary switch
• Each Add-On Switch must be installed within 200ft of the primary switch
• For multi-way configurations, an Add-On switch must be within 75ft of each directly wired Add-On switch and end-to-end multi-way wiring interconnection must fit not exceed 300ft
• Uses a standard toggle wallplate, sold separately

Why You Would Use This Product:

The Enbrighten 59340 Add-On Toggle Switch is a versatile addition to your home automation setup, allowing you to expand your existing lighting control system with ease. Use it to extend the reach and functionality of your Enbrighten smart switches, allowing you to control lights from multiple locations throughout your home, such as opposite ends of staircases, hallways, or entryways. With its easy installation process, the 59340 Add-On Toggle Switch seamlessly integrates with your existing Enbrighten setup, providing added convenience and flexibility in managing your home lighting.

In The Box:

• Enbrighten In-Wall Add-On Toggle Switch, White
• Installation Guide

Notes:

• For indoor use only.
• Not designed for stand-alone use.
• Single-gang wallplate sold separately.
• The add-on switch must be used with Enbrighten/Jasco wireless devices (Z-Wave, ZigBee or Bluetooth). It does not have wireless functionality and does not act as a repeater in your wireless control network.