Skip to main content
  • Home
  • Platinum Tools LANSeeker Cable Tester

Platinum Tools LANSeeker Cable Tester

$68.68
SKU: PLTP500C

IN STOCK! Ships same business day if ordered before 3pm PT

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Product Description

The LanSeeker is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. An easy-to-use professional grade tool, the LanSeeker is a must have for residential and commercial cable installers. When the unit senses a connection between the main and remote unit, the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected.

LanSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs.

  • Displays cable test results on main and remote units in less than 2 seconds
  • Immediately detects shorts by just plugging in one end of a cable to the tester
  • Identifies shorts, opens, miswires, reversed and split pairs
  • No on/off switch, automatically starts test when a connection is sensed between main and remote unit
  • Debug mode diagnoses and displays faults one pair at a time
  • Includes tone generator
  • Self-stored remote
  • Made in the USA

Applications

  • Installation and troubleshooting of twisted pair security and datacom cables
  • Identifies faults
  • Generates tone for tracing
  • Supports unshielded or shielded twisted pair

In The Box:

  • Main unit
  • Remote unit
  • 9V battery

Tech Specs

  • Part Number: TP500C
  • Battery Life: Times are for the full capacity of the battery used continuously in one of the following modes (typical, 9V alkaline, included):
    • Standby mode: 2.5 hours
    • Cable testing mode: 20 hours
    • Tone mode: 170 hours
  • Cable Type: Shielded or unshielded, CAT3, CAT4, CAT5, CAT5e, and CAT6
  • Minimum Cable Length (for testing split pairs): 3 feet (1 m)
  • Maximum Cable Length (for testing): 1,000 feet (305 m)
  • Coax Cable: 100 ohms maximum DC resistance, center conductor plus shield
  • Temperature:
    • Operating: 32° to 122°F (0° to 50°C)
    • Storage: -4° to 158°F (-20° to 70°C)
  • Humidity: 10 to 90 percent, non-condensing
  • Dimensions: 1.2(H) x 2.85(W) x 14.5(L) inches (3.0 x 7.2 x 14.5 cm)
  • Weight: 5.7 ounces (162 g) with battery
  • Approvals: CE
  • Warranty: 1-Year Limited