FIBARO Z-Wave Plus Single Switch 2, Gen5
Product Description
Add Z-Wave control to nearly any electric device by wiring in the FIBARO Single Switch 2. The Single Switch 2 is built to be wired into your existing wall switch or electrical box to enable remote On/Off commands using Z-Wave, as well as monitor the connected device's energy usage. The compact size of the device allows it to fit into most wall switch boxes or housings. You can control the Single Switch 2 with a wall switch or remotely via Z-Wave. The switch works with various types of wall switches and is designed with built-in overheating, overload, and voltage protection. The Single Switch 2, along with other FIBARO products, is Z-Wave Plus Certified, meaning it features improved performance and increased compatible with any Z-Wave or Z-Wave + Controller.
In The Box:
- Single Switch 2
NOTE: Requires a Z-Wave hub or controller.
Tech Specs
- Part Number: FGS-213 ZW5 US
- Power Supply: 100-240V – 50/60 Hz
- Rated load current: IEC standards: 8A UL standards (resistive load): 6.5A UL standards (incandescent load): 5A
- Operating temperature: 32-95 °F
- For installation in boxes: Ø ≥ 1.97 in, depth ≥ 2.36 in
- Overcurrent protection: Required external 10A circuit breaker
- Radio protocol: Z-Wave Plus (500 series chip)
- Radio signal power: up to 1mW Radio frequency: 908.4, 908.42 or 916.0 MHz US;
- Range: 164 ft outdoors; up to 131 ft indoors (Depending on terrain and building structure)
- Dimensions (LxWxH): 1.67 x 1.5 x 0.8 in