Leviton Evr-Green 4000 Bollard (Free-Standing) Body

The Leviton Evr-Green 4000 Bollard (Free-Standing) Body is a component for the Evr-Green 4000 Level 2 networked public charging stations. This supporting pole supports Single Head or Dual Head Bollards and can be installed onto new or existing concrete pads anywhere electric vehicle charging is planned to be added. The body's hollow design protects cabling and wires from rain and other environmental factors. A Concrete Mounting Kit (CPCMK, sold separately) is required to complete the installation.

• Free-standing pole mount for a Evr-Green 4000 Charging Station
• Supports either Single Head (CPHU1) or Dual Head Bollard (CPUH2), each sold separately
• Requires the Evr-Green 4000 Concrete Mounting Kit (CPCMK)

Why You Would Use This Product:

If you are planning to install a Leviton electric vehicle charging station in a location away from a wall, this free standing pole installation is required.

The Leviton Evr-Green 4000 Bollard (Free-Standing) Body is compatible for use with Evr-Green 4000 Level 2 networked public charging stations only. As a component of the charging station, the following components are required for operation, all sold separately:

• one CPCAP-B bollard cap
• one CPHU1 or CPHU2 Gateway Head
• one CPCMK concrete mounting kit
• one CPCBX Cable Management Assembly

In The Box:

• Housing with pedestal inside
• Rubber spacer (inside the housing)
• Plastic cap
• 4 x Phillips screws

NOTE: Do not seal the pedestal to the concrete pad with caulking, silicone, or other sealing material. Doing so traps water inside the housing. The pedestal is designed to shed moisture between its bottom surface and the concrete pad.