Seco-Larm Enforcer Gigabit PoE Extender, 1-Input to 4-Outputs
Product Description
The Seco-Larm Enforcer Gigabit PoE Extender, 1-Input to 4-Outputs, connects PoE cameras, IP access control, IP speakers/intercoms, IP telephony, or other PoE devices (up to 4) using a single Cat5e or Cat6 cable to extend data and power by an additional 328ft (100m) and for a total range of up to 984ft (300m) with two extenders.
- Extends the range of PoE Ethernet devices over Cat5e or higher cables an additional 328ft (100m)
- Connects 10,100,1000BaseT PoE devices including IP cameras, IP access control, VOIP, IP speakers/intercoms, etc.
- Supports up to gigabit transmission rates
- Passive operation – no external power required
- Easy plug-and-play installation
- Compliant with IEEE802.3af, IEEE802.3at
- Automatically detects PoE equipment and protects from damage due to faulty installation
- 4 Output ports for up to 4 PoE devices
- Also compliant with IEEE802.3bt 4 pairs
In The Box:
- PoE Extender
- 2 x Wall Mount Brackets
- 2 x Wall Mounting Screws
- 2 x Plastic Wall Anchors
- 4 x Extender Bracket Mounting Screws
- Manual
Tech Specs
- Part Number: NR-P401E-TQ
- UPC: 676544020837
- Connections PoE In: 1x Shielded RJ-45
- Connections PoE Out: 4x Shielded RJ-45
- PoE Power Input: Up to 60W
- PoE Power Output: Up to 55W (total for 4 ports)
- Transmission Range 1 Extender: 656ft (200m)
- Transmission Range 2 Extenders: 984ft (300m)
- Data Link: Both pin 1/2, 3/6 and 4/5, 7/8
- Power Link: Pin 1/2(+), 3/6(–) up to 12W for 4 PSE, 25W for 2 PSE
- Network Cables: Shielded Cat-5e or higher
- Ethernet Speed: 10/100/1000 Mbps half/full duplex
- PoE Standard: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt 4 pairs (60W)
- LED Indicators Power Link: Yellow
- LED Indicators Data Link: Green, steady
- LED Indicators Data Transmit: Green, flashy
- IP Rating: None
- Operating Humidity: 90% (maximum, non-condensing)
- Operating Temperature: 14 to 113°F (-10 to 45°C)
- Dimensions: 4-11/16 x 1-1/8 x 3-3/8 inches (119 x 28 x 85 mm)