Autoslide Wireless IR Sensors, Twin Pack
Product Description
The Autoslide Wireless IR Motion Sensors, Twin Pac, is an add-on accessory for the Autoslide automatic sliding door system. The Wireless IR Motion Sensor connects to the Autoslide wirelessly and can be installed above the door for people or low on the door jamb for pet use. When the IR beam from the sensor is broken by an approaching person or pet, the Autoslide system will immediately be triggered to open the door and provide hands-free convenience. This is especially helpful when your hands are full or if a certain family member has trouble remembering to shut the door behind them. The IR beam length is adjustable, allowing it to be set so that an approaching young child will not activate the door. The Wireless IR Motion Sensor requires a 9V battery for operation, which is included.
It is important to note that installation of only one IR Motion Sensor will only automate the sliding door one-way. To fully automate your sliding door from the inside and outside, two Infrared Motion Sensors will need to be installed.
In The Box:
- Hardwired Infrared Motion Sensor (Twin Pack)
- Cables to Wire Sensor to the Autoslide System
- Mounting Screws
NOTE: The infrared motion sensors must be mounted out of direct sunlight or weather/rain exposure.
Tech Specs
- Part Number: AS038PST
- UPC: 859807002102
- Sensor: Infrared (IR)
- Connectors: Cables to wire sensor to the Autoslide system
- Battery: 9 Volt