Leviton Decora In-Wall Occupancy Sensor Switch, Manual-On, 2A, Single-Pole

The Leviton Decora Vacancy Motion Sensor In-Wall Switch, Manual-On, 2A, Single Pole is a 180° PIR motion sensor which can automatically turn Off connected lights or electrical loads when motion isn't detected after a set time. The switch can also manually turn On/Off connected devices by pressing the pushbutton. It can detect movement up to 30 feet away, or 900 square feet of coverage within a 180° field of view. It supports 150W LED/CFL, 250W Incandescent/Halogen lights, as well as 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive loads.

Features:

• Manual ON/Automatic OFF operation Controls LED, CFL, Incandescent, Halogen, Magnetic Low Voltage, Electronic Low Voltage
• Provides 180° Field-of-View, 900 sq. ft. of coverage
• Shallow design easily fits in the wallbox and can replace a single pole switch
• Can be connected to a neutral wire or ground wire if no Neutral wire is present
• Interchangeable line and load wires
• Adjustable delayed OFF time which can be set for 1 minute, 5 minutes, 10 minutes or 20 minutes
• Adjustable Range (sensitivity) to fit various coverage areas
• Convenient push-button provides Manual OFF light switching at any time

In The Box:

• Motion Sensor In-Wall Switch, White

NOTES: Ground or neutral wiring are required for installation. Wallplate sold separately. Requires a Phillips screwdriver, Electrical tape, cutters, and pliers for installation.