Leviton Decora In-Wall Occupancy Sensor Switch, Auto-On, 5A, Single-Pole or 3-Way

The Leviton Decora Motion Sensor In-Wall Switch, Auto-On, 5A, Single Pole or 3-Way is a 180° PIR motion sensor which can automatically turn On/Off connected lights or electrical loads when motion is detected, or manually turn Off connected devices by pressing the pushbutton. It can detect movement up to 30 feet away, or 900 square feet of coverage within a 180° field of view.

The sensor switch can be installed within a single pole application or as part of a 3-way application when wired with a multi-pole switch. It supports 300W LED/CFL and 600W Incandescent/Halogen lights, as well as 400VA Magnetic Low Voltage, 400VA Electronic Low Voltage, ¼ HP Motor, 5A Resistive loads.

Features:

• PIR motion sensor sends Auto ON/OFF controls to connected loads when movement is detected
• Supports LED, CFL, Incandescent, Halogen, Magnetic Low Voltage, Electronic Low Voltage or Motor loads
• Provides 180° Field-of-View, 900 sq. ft. of coverage
• Shallow design easily fits in the wallbox and can replace single pole switch
• Can be connected to a neutral wire or ground wire if no Neutral wire is present
• Ambient light override prevents sensor from switching the lights ON when there is ample natural sunlight
• Adjustable delayed OFF time which can be set for 1 minute, 5 minutes, 10 minutes or 20 minutes
• Adjustable Range (sensitivity) to fit various coverage areas
• Convenient push-button provides Manual OFF light switching at any time

In The Box:

• PIR Motion Sensor Switch, White
• Ivory and Light Almond Faceplates

NOTES: Ground wiring is required; neutral wiring is optional for this installation. Wallplate sold separately. Requires a Phillips screwdriver, Electrical tape, cutters, and pliers for installation.