Seco-Larm Enforcer Wired Long-Range RF Transmitter

The Seco-Larm Enforcer Wired Long-Range RF Transmitter works with Seco-Larm HL-series 917 MHz receivers to turn wired sensors and other devices wireless. It operates on the 917 MHz frequency, has an operating range up to 1,800 ft (550m), and offers endless possible codes. Additionally, this wired long-range RF receiver offers significantly increased range with less interference even when physical obstacles are in the way, or during extreme temperatures and other harsh environmental conditions.

• Turns wired sensors and other devices wireless
• 917MHz operating frequency with range up to 1,800ft (550m)
• Over 2.028×1031 possible codes
• LED transmission and low-battery indicator
• Compatible with all Seco-Larm HL-series receivers of the same frequency
• Includes one 3VDC lithium battery (CR2032)
• May also be powered by an external 4.5~13 VDC external regulated adapter (not included)

Why You Would Use This Product:

In order to use the Seco-Larm Enforcer Wired Long-Range RF Transmitter you'll need to install a Seco-Larm HL-series 917 MHz receiver (sold separately) to the wired sensor or device you want to control wirelessly. Once the receiver is installed, the long-range RF transmitter will come in handy in instances where it would be more convenient to control a wired device or sensor from a distance without the use of wires. For example, if you have a gate that opens when a wired sensor is activated, you would be able to open the gate from a distance instead of having to trigger the sensor. Or if you have a wired sensor that controls smart lights at your property, you would be able to turn on/off your smart lights remotely up to 1,800ft away.

In The Box:

• Transmitter
• Battery (CR2032)
• Manual

NOTE: To control a wired device wirelessly, install a Seco-Larm Enforcer HL-series RF 917 MHz receiver (sold separately) to the device to be controlled and use the Seco-Larm Enforcer HL-951T1-SWQ transmitter to control it remotely.