Seco-Larm Enforcer Outdoor Wave-To-Open Sensor with Manual Override
Product Description
The ENFORCER Outdoor Double-Gang Wave-to-Open Sensor with Manual Override is a full-featured exit plate using IR technology to allow egress from a protected area or activate a device with a simple wave of a hand. Since no touch is required, it is suitable for use in hospitals, clinics, labs, cleanrooms, schools, factories, or offices. The manual override button allows operation during a power failure.
- Clean and simple no-touch operation reduces the risk of cross-contamination
- Adjustable sensor range up to 7" (18cm)
- Weatherproof (IP65) for outdoor use
- 1.2A Relay, adjustable duration 0.8~30 seconds or toggle
- Manual override button functions during a power failure
- LED-illuminated sensor area for easy identification
- Selectable LED colors (turns from red to green or green to red) on sensor activation
- Stainless steel plate
In The Box:
- Wave-to-Open Sensor
- Manual
Tech Specs
- Part Number: SD-9463-KSVQ
- Operating Voltage: 12~24 VAC/VDC
- Current Draw (max.):
- Standby: 16mA@12VDC / 25mA@24VDC
- Triggered: 25mA@12VDC / 32mA@24VDC
- Relay Type: Form C dry contact, 1.2A@30VDC
- Response Time: 10ms
- LEDS: Default, reversible by jumper
- Standby: Red
- Triggered: Green
- Output Time: 0.8 to 30 sec. or toggle, or as long as sensor is triggered
- Sensing Range: Adjustable between 2-3/8" to 7" (5 to 18 cm)
- Operating Temperature: -4° to 131° F (-20° to 55° C)
- Weight: 5.6-oz (160g)
- Warranty: 1 Year